• Welcome to Jetboaters.net!

    We are delighted you have found your way to the best Jet Boaters Forum on the internet! Please consider Signing Up so that you can enjoy all the features and offers on the forum. We have members with boats from all the major manufacturers including Yamaha, Seadoo, Scarab and Chaparral. We don't email you SPAM, and the site is totally non-commercial. So what's to lose? IT IS FREE!

    Membership allows you to ask questions (no matter how mundane), meet up with other jet boaters, see full images (not just thumbnails), browse the member map and qualifies you for members only discounts offered by vendors who run specials for our members only! (It also gets rid of this banner!)

    free hit counter

1999 LS 2000

Jerry1440

Active Member
Messages
10
Reaction score
3
Points
32
Boat Make
Yamaha
Year
1999
Boat Model
LS
Boat Length
19
How difficult is it to replace the scupper valve hose from deck to rear, thought I’d ask before I take whole back seat and stuff out , and maybe/or maybe not able to get deck hose off, have old scupper out and new ready to install
1999 LS2000. Twin engine
 
It shouldn't be to difficult to replace the hose it passes though a pvc pipe under the engine compartment and is accessible under the back seat and under the clean out tray in the rear. It's pretty tough hose why do you need to replace it?
 
Mine goes up drivers side, I was just gonna replace whole hose, changing out the plastic original scuppers valve with stainless steel, was wondering before I took whole backseat out , it hose is accessible in that side
 
I'm doing the same for my 03 AR210 this weekend, my assumption is it's accessible from rear clean out hatch. I gotta figure out why my bilge doesn't work anyways. Lmk how you make out
 
Back
Top